Miniature Electric Ball Valve
manufacturer: Shanghai MeiYan Yi Pump & Valve Co., Ltd.
Eml: sales@1bengfa.com
Tel: +86 (21) 5640 2009
Mob: +86 138 1691 3072（WeChat Same Account）
product drawing
Miniature electric ball valves
Specification： DN15-32
It is applied to a variety of craft occasion that has great restriction of installation dimensions and volume.
Product characteristic
the volume is ultra-small, the height is shorter than 120mm, the weight is 0.8KG.
All steel metal gear transmission (operational life is far beyond the plastic gear), worm gear output, and the transmission structure is simple and reliable
Self-locking (self-holding valve position) function.
The product supports a variety of power supply (AC85V-260V) drive access.
Simple structure, reliable performance. It can replace variety of small-caliber solenoid valve products widely.
With a large pressure difference resistance, hard to block, and it has a purge function for the pipeline (core self-cleaning function)
protection level：IP65
With the Full On / Full closure output signals (NPN transistor set current)
Applicable field
Air-conditioning systems, fire systems, water treatment systems, pipeline purging, analytical instruments, gas sampling, etc.
Product technical parameter
| technical quota | product technical parameter |
| power supply voltage | AC85V-260V |
| mechanical stroke angle | 0-90 degree |
| connection manner | pipe thread(inside screw) |
| action time | 7 Second |
| rated current | 200mA |
| drive motor | 4.6W |
| protector | Thermistor Motor Protection Mechanical limit block |
| open indicator | full open/close position feedback |
| full open red（LED） | |
| full close green（LED） | |
| output signal | full open/close output signal |
| NPN transistor emitter sharing, collector current | |
| contact volume：DC50V，20mA) | |
| applicable environment | temperature：-25~+55℃ humidity：10—90％RH |
| nominal diameter | DN15/DN20/DN25/DN32 |
| nominal pressure | PN1.0Mpa |
| protection level | IP65 |
| installation direction | any angle |
| distributing cable | 0．3×6 core cable 30CM |
| valve material | SUS304 stainless steel |
| sealing | PTFE |
| weight | 0．8kg |
