You are here:
News
News
quick-acting ball valves and full-port ball valves 2012-07-02
Most ball valves are of the quick-acting type (requiring only a 90-degree turn to operate the valve either completely open or closed), but many are planetary gear operated.
a correct ball valve 2012-06-29
The fix ball valve is distinct from that of floating ball valve. When it functions, the whole electrical power developed by the fluid pressure on the ball will entirely pass to the bearing, which trig
When ball valve is closed 2012-06-28
When the ball valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s posit
general types of ball valves 2012-06-27
Full port: This has an over sized ball so that the hole in the ball is of the same size as the pipeline thereby resulting in lower friction loss. The valve is larger and the flow is unrestricted.
ball valves 2012-06-26
Lined ball valves rely on elastomers (rubber) and/or polymers (PTFE) to totally isolate the valve body and stem journal area from the corrosive and/or erosive effects of the line media.
several types of ball valves 2012-06-25
there are several method styles which consists of individual body, split body, three product body, best entry and welded body. The big difference amid the ball valves is centered upon the casing, whic
ball valves are operated 2012-06-21
some ball valves are equipped with an actuator that may nicely be pneumatically or engine operated. all those valves are typically equipped using a positioner. By executing this, it is effortless for
ball valve application 2012-06-20
Ball valves have a port (a hole) in the middle. Further, ball valves’ work can be represented as the following process: when the port is in line with both ends of the ball valve, flow will occur.
