You are here:
News
News
Articles for Hife-Pipe Jacket Heat Transfer 2010-12-22
Does anyone have any good articles they could send me on vessel jacket heat transfer (dimple, half-jacket, conventional, etc).
Gas engine driven compressor 2010-12-22
We are compressor manufacturer and packager at the same time: all our compressor (till now) have been driven by small low voltage electric motors (400V 37-400 kW).
dry sump oil separators 2010-12-21
The engine is a V-twin with a dry sump oil system. The engine crankcase is basically sealed
and runs at between 5 and 10 inches of vacuum generated by the scavange pumps.
The breathing to atmosphere
Check Valve Erosion Problem 2010-12-21
I am currently investigating a problem in which sand erosion is occuring in a multiphase (oil/water/gas & sand) pipeline.
Upstream of a check valve 2010-12-21
Why some manufacturer asked for 8D stright pipe in upstream of check valve? If I reduce this amount to 1D what will be happend? Is there anybody who knows this issue.
Estimate pressure drop/equivalent length on a diaphragm valve? 2010-12-20
To empty a tank on occasion, I'm planning to install a PD pump, pumping about 30-60 gpm of warm water through a 2" line. At the end of the line my circuit will join into a larger 50 psig line. I'll ad
How to avoid the CONTRACTION VOIDS??? 2010-12-20
We are talking about a thick part, made of nylon with glass fiber. Once injected, in the surface it seems to be well compacted but in the interior there are "bubbles".
Centrifugal pump parallel operation 2010-12-20
I'm looking to run 2 large (600kW) centrifugal pumps in parallel (duty / assist). One of the pumps is new the other is 50 years old but has similar head / flow characteristic although lower efficiency
